Hybrid Track® L2 - Top Routing: pedalboard

AVAILABLE EARLY AUGUST

Aclam’s Hybrid Track® L2 – top routing is the large pedal board of the Hybrid Track® series, at least in the standard format. The combination of both fastening methods, Velcro® and Smart Track®, will give you an attachment choice for each pedal increasing the versatility and space management possibilities. With this large pedal board, you will always keep your pro rig taken care of. Check it out!

CLASSIC AND NEW

Aclam’s Hybrid Track® L2 – top routing allows using both attaching methods in one large pedal board. You can use the Smart Track® method for those mew pedals that haven’t been covered with Velcro®, or the really expensive boutique ones, and use the Velcro® brand strips if you already have pedals with this polyester stuck on them. A choice for each specific case.

Enjoy the modular features of Aclam’s Smart Track® and Evo Track® fastening methods as well as both attaching approaches, having it all was never this easy!

CABLE OVERLAY

Aclam’s Hybrid Track® L2 – top routing is only available with the top routing format and will reverse into a Smart Track® L2 – top routing.

If you are concerned about the cabling mess you should know that you can use the Tidy Cables to keep this large pedal board neat. Use these polyamide clips to attach and route cables across the track’s grooves, under the pedals and up vertically using the clamped-clips know as Tidy Cables Duo.

Having this kind of routing configuration will come in handy if there is a signal problem and you must detect where the problem is rapidly. Lifting and flipping over a large pedal board like the Hybrid Track® L2 – top routing can be tricky, especially if it’s fully loaded of pedals. With the cables on the top side you can see what is going on without having to do any kind of effort.

ALL THE BITS AND PIECES

Aclam’s Hybrid Track® L2 - top routing pedalboard is a large pedal board that can fit up to 14 pedals and is full of customization possibilities.

Need a two-teared large pedal board to access the effects pedals more comfortably? Upper and Wahpper are your choices.

Want to get rid of the power supply that is taking space on the top of the board so you can place that new stompbox? Check the PSU supports available.

We also do custom parts, so contact us if there is something you wish us to consider.

If you don’t know if the Smart Track® fastening method will make you happy you can always try Aclam’s Hybrid Track® L2 – top routing. All the fastening options in one large pedal board. Many hours of excitement setting up your new pedalboard as you have always wanted. Check it out at Aclam now!